Equally adaptable for all target types and ground conditions.
Жинхэнэ ухаалаг нэгэн зэрэг хамгийн их гүйцэтгэлийн хувьд олон давтамж, түүнчлэн олон тооны нэг давтамжтай.
Бүх зорилтот төрлүүд ба газрын нөхцөлд адилхан тохирно:
Түргэн сэргээх хурдыг зөв ашиглан Зорилтот ID нь хогийн саванд ямар ч үнэ цэнэтэй зорилтыг алдахгүй байх болно.
Туршилтын горим бүр нь 2 өөрчлөн Хайлтын Горимуудаар та горим бүрт өөрийн дуртай тохируулгыг хадгалах боломжтой.
Experience ultra-fast wireless audio with the WM 08, or use fast aptX™ Low Latency / Bluetooth headphones.
Rugged and lightweight construction allows you to enjoy long detecting sessions in any environment.
EQUINOX нь гүний болон гол, горхи, нуурууд дээр илрэхэд тохиромжтой. (3м / 10 фут).
Ил тод LCD нь Зорилтот ID дугааруудыг ихэсгэж, зорилтот ID-г харахад хялбар. Мэдэж байх үед танд хэрэгтэй бүх мэдээллийг зөв байрлуулсан байна.
Илрүүлэх горимууд болон үйлдлийн давтамж нь динамик болон тасралтгүй илрүүлэх туршлагын товчлуурыг дарах үед даруй өөрчлөгдөж болно.
Нарийвчилсан Тохиргоог ашиглан таны детекторыг илүү их хянах боломжтой болно; Та хэр хэмжээний зорилтот мэдээллийг сонсохоо шийднэ.
EQUINOX 600 & 800 нь илрүүлэх төрөл бүрийн ороомгийг санал болгодог. EQX 06 Smart Coil , EQX 11 Smart Coil , EQX 15 Smart Coin by Minelab нь дэлхийн Minelab дилерүүдээс авах боломжтой. EQUINOX цувралын гуравдагч этгээдийн дагалдах ороомгийг Coiltek-ээс авах боломжтой .
Multi-IQ Simultaneous Multi-Frequency
Low frequencies typically give more depth on large targets than high frequencies, which are usually more sensitive to small targets. With Multi-IQ you can operate across the full spectrum of frequencies simultaneously for maximum results.
5F×8 (Five Frequency Times Eight) provides five individual transmit frequencies in the one metal detector, selectable at the push of a button. Each transmit frequency optimises the detector for different size targets and conditions. EQUINOX 800 offers 5 single frequencies of 5, 10,15, 20, and 40 kHz, giving an 8 times range or ratio from 5 to 40, hence the 5F×8 technology designation.
The individual selectable frequencies in EQUINOX 800 are:
5 kHz - Great for large silver coins
10 kHz - Good for small Roman hammered coins
15 kHz - A good general treasure detecting mode
20 kHz - Ideal for general treasure detecting and gold prospecting
40 kHz - Optimum sensitivity to very small gold nuggets
Having five selectable frequencies gives the versatility that is equivalent to five conventional single frequency detectors.
Note that EQUINOX Series detectors also feature Multi-IQ technology which allows you to operate all available single frequencies plus more, simultaneously. The option to operate your detector in a single frequency can be helpful if you are experiencing excessive ground noise when using the Multi-Frequency setting.
This Instruction Manual does not include information regarding the EQUINOX Software Update 2.0 or the EQUINOX Software Upgrade 3.0.
This Instruction Manual does not include information regarding the EQUINOX Software Update 2.0 or the EQUINOX Software Upgrade 3.0.
This Instruction Manual does not include information regarding the EQUINOX Software Update 2.0 or the EQUINOX Software Upgrade 3.0.
This Instruction Manual does not include information regarding the EQUINOX Software Update 2.0 or the EQUINOX Software Upgrade 3.0.
This Instruction Manual does not include information regarding the EQUINOX Software Update 2.0 or the EQUINOX Software Upgrade 3.0.
This Instruction Manual does not include information regarding the EQUINOX Software Update 2.0 or the EQUINOX Software Upgrade 3.0.
This Instruction Manual does not include information regarding the EQUINOX Software Update 2.0 or the EQUINOX Software Upgrade 3.0.
This Instruction Manual does not include information regarding the EQUINOX Software Update 2.0 or the EQUINOX Software Upgrade 3.0.
This Instruction Manual does not include information regarding the EQUINOX Software Update 2.0 or the EQUINOX Software Upgrade 3.0.
This Instruction Manual does not include information regarding the EQUINOX Software Update 2.0 or the EQUINOX Software Upgrade 3.0.
To update your EQUINOX with the Minelab EQUINOX 2.0 Software Upgrade, please click here.
To update your EQUINOX with the Minelab EQUINOX 3.0 Software Upgrade, please click here.