Une nouvelle fréquence unique de 4 kHz a été ajoutée aux options existantes de 5, 10, 15, 20 et 40 kHz. Cette nouvelle fréquence de 4 kHz améliore la détection de grandes cibles profondes, en particulier celles que l'on trouve dans certaines régions d'Asie. En raison de l'optimisation de ces conditions, cette nouvelle fréquence peut répondre différemment pour les utilisateurs par rapport aux autres fréquences uniques.
Tous les autres paramètres mono et multifréquences sont inchangés dans leurs performances.
En plus de la fonction de mise à niveau de 4 kHz, diverses améliorations de stabilité ont été incluses.
For step-by-step instructions on downloading the software, please refer to the following brochures:
Download the EQUINOX 600 / 800 Software Upgrade 3.0 Instructions (EN)
Download the EQUINOX 600 / 800 Software Upgrade 3.0 Instructions (ZH)
Minimum System Requirements:
USB 2.0 port
EQUINOX USB Charging Cable with Magnetic Connector
Windows 10
50 MB of hard drive space
20 MB of RAM
MAC OS
Greater than 10.13 High Sierra
50 MB of hard drive space
30 MB of RAM
Note:
Important: Do not turn off or disconnect the EQUINOX 600 / 800 during the update process.
Once the MUU is downloaded, open the application and follow these instructions:
|
1. Connect the EQUINOX 600 / 800 to the computer USB port using the magnetic charging cable and turn on the detector. |
 |
|
2. When the EQUINOX 600 / 800 is identified, the MUU will communicate with the detector and determine the current software version. |
 |
|
3. If an update is available, the MUU will display Updates are available for your detector. Click INSTALL to begin the upgrade or QUIT to close the MUU. |
 |
|
4. If the metal detector is up to date, the application will display Your detector is up to date and prompt you to QUIT the application. |
 |
|
5. The EQUINOX 600 / 800 screen will go blank during the update; a green LED on the top left corner of the control box will blink rapidly while the update is in progress. |
 |
|
6. Installation will take approximately 1 minute. Once the upgrade is complete, the EQUINOX 600 / 800 will restart and the MUU will prompt you to disconnect the detector and QUIT the application. Note: Close the application and reopen if updating multiple EQUINOX 600 / 800 detectors |
 |
