Equally adaptable for all target types and ground conditions.
Pintar Multi-Frekuensi Serentak pintar untuk prestasi maksimum, ditambah pelbagai frekuensi tunggal.
Sama-sama menyesuaikan diri untuk semua jenis sasaran dan keadaan dasar:
Kecepatan pemulihan cepat dengan ID Sasaran yang tepat memastikan Anda tidak akan kehilangan sasaran yang berharga di kalangan sampah.
Setiap Mod Mengesan mempunyai 2 Profil Carian peribadi supaya anda boleh menyimpan tetapan kegemaran anda dalam setiap mod.
Pengalaman audio tanpa wayar ultra cepat dengan WM 08, atau gunakan fon kepala Latihan / Latihan rendah aptX ™ yang cepat.
Pembinaan lasak dan ringan membolehkan anda menikmati sesi pengesanan yang panjang di mana-mana persekitaran.
EQUINOX sepenuhnya tenggelam, sesuai untuk mengesan di pantai dan di sungai, sungai dan tasik. (3m / 10 kaki).
LCD jelas mempunyai nombor ID Sasaran yang besar supaya anda dapat melihat ID sasaran anda sekilas. Semua maklumat yang anda perlukan semasa mengesan berada di hadapan anda.
Mengesan Mod dan kekerapan operasi boleh dengan serta-merta ditukar pada menekan satu butang untuk pengalaman mengesan dinamik dan tidak terganggu.
Dapatkan lebih banyak kawalan audio pengesan anda dengan Tetapan Lanjutan; anda menentukan berapa banyak maklumat sasaran yang anda dengar.
EQUINOX 600 & 800 menawarkan pelbagai gegelung untuk pengesanan khusus. EQX 06 Smart Coil , EQX 11 Smart Coil , dan EQX 15 Smart Coil by Minelab boleh didapati dari Penjual Minelab di seluruh dunia . Gegelung aksesori pihak ketiga untuk Seri EQUINOX boleh didapati dari Coiltek .
Multi-IQ Simultaneous Multi-Frequency
Low frequencies typically give more depth on large targets than high frequencies, which are usually more sensitive to small targets. With Multi-IQ you can operate across the full spectrum of frequencies simultaneously for maximum results.
5F×8 (Five Frequency Times Eight) provides five individual transmit frequencies in the one metal detector, selectable at the push of a button. Each transmit frequency optimises the detector for different size targets and conditions. EQUINOX 800 offers 5 single frequencies of 5, 10,15, 20, and 40 kHz, giving an 8 times range or ratio from 5 to 40, hence the 5F×8 technology designation.
The individual selectable frequencies in EQUINOX 800 are:
5 kHz - Great for large silver coins
10 kHz - Good for small Roman hammered coins
15 kHz - A good general treasure detecting mode
20 kHz - Ideal for general treasure detecting and gold prospecting
40 kHz - Optimum sensitivity to very small gold nuggets
Having five selectable frequencies gives the versatility that is equivalent to five conventional single frequency detectors.
Note that EQUINOX Series detectors also feature Multi-IQ technology which allows you to operate all available single frequencies plus more, simultaneously. The option to operate your detector in a single frequency can be helpful if you are experiencing excessive ground noise when using the Multi-Frequency setting.
This Instruction Manual does not include information regarding the EQUINOX Software Update 2.0 or the EQUINOX Software Upgrade 3.0.
This Instruction Manual does not include information regarding the EQUINOX Software Update 2.0 or the EQUINOX Software Upgrade 3.0.
This Instruction Manual does not include information regarding the EQUINOX Software Update 2.0 or the EQUINOX Software Upgrade 3.0.
This Instruction Manual does not include information regarding the EQUINOX Software Update 2.0 or the EQUINOX Software Upgrade 3.0.
This Instruction Manual does not include information regarding the EQUINOX Software Update 2.0 or the EQUINOX Software Upgrade 3.0.
This Instruction Manual does not include information regarding the EQUINOX Software Update 2.0 or the EQUINOX Software Upgrade 3.0.
This Instruction Manual does not include information regarding the EQUINOX Software Update 2.0 or the EQUINOX Software Upgrade 3.0.
This Instruction Manual does not include information regarding the EQUINOX Software Update 2.0 or the EQUINOX Software Upgrade 3.0.
This Instruction Manual does not include information regarding the EQUINOX Software Update 2.0 or the EQUINOX Software Upgrade 3.0.
This Instruction Manual does not include information regarding the EQUINOX Software Update 2.0 or the EQUINOX Software Upgrade 3.0.
To update your EQUINOX 600 or EQUINOX 800 with the Minelab EQUINOX 2.0 Software Upgrade, please click here.
To update your EQUINOX 600 or EQUINOX 800 with the Minelab EQUINOX 3.0 Software Upgrade, please click here.