Superior TREASURE performance

E-TRAC

Specification

Image
ProductE-TRAC
ApplicationCoin, Relic, Jewellery & Beach
TechnologyFBS, Smartfind
Frequency/TransmissionMultiple frequencies: 1.5 - 100kHz
Coil (standard)11" Double-D lightweight, waterproof.
Audio OutputInternal speaker & 6.35mm ( 1/4") headphone jack.
Headphones SuppliedKoss 100 ohm headphones.
Visual DisplayVery large 72mm x 48mm (2.8" x 1.9") greyscale LCD with contrast adjustment.
BacklightYes.
USB ConnectivityUSB connector for communication with PC.
MemorySettings saved automatically while detecting and remain until changed or reset.
Depth IndicationAccurate gauge active in normal detecting and Pinpoint mode.
Detect Modes4 pre-programmed user Modes (Coins, High Trash, Beach and Relics) and 4 user customisable Modes.
DiscriminationSmartfindTM 2 dimensional Discrimination: Ferrous 35, Conductivity 50. 10 discrimination patterns (Coins, All-Metal, Fe Coins, Jewellery, Foil, Pull Tab, Iron, Crowncap, Screwcap & Nail) & 10 user slots.
Timings-
Audio tone1,2,4 & Multi-tone; customizable for conductivity or ferrous response. Variable by 30 adjustable steps.
Audio TypeNormal, Long, Smooth & Pitch Hold.
Ground BalanceAutomatic ground compensation - advanced digital filtering. Ground settings Neutral & Difficult.
Ground Balance Type-
Trash Density(2) Low & High.
PinpointNon-motion with modulated audio and visual crosshair on LCD, 2 modes: normal and sizing.
Sensitivity AdjustFully automatic with adjustable offset, manual setting 1 to 30.
Tune / Noise CancelManual & Automatic (11 channels)
ThresholdFiner adjustment level from 0 to 50.
Target Volume AdjustLimit & Gain (1 to 30).
Battery1600mAh NiMH or alkaline batteries.
Low battery alertAudio & visual indication.
Length1060mm -1380mm (41.7" - 54.3").
Weight1.6kg (3.5lbs) (ex. battery).
Warranty3 years control box & coil.

This table only provides a guide and regional variance may occur in relation to the standard items included with a detector. Please contact your regional office for confirmation of these details and product's availability.

E-TRAC Patterns

A significant advancement of the new E-TRAC is the inclusion of a USB connection facility (supplied), for the purpose of allowing a connection between your E-TRAC and a PC or laptop. You can download / upload and share Discrimination pattern programs of your choice. To help get you started with E-TRAC Xchange, here are some specific pattern files, which have been created by our various field testers around the world, for you to download. Please note that these patterns were developed for particular targets/locations during detecting sessions, however you may choose to adapt them to suit your own requirements and save them using E-TRAC Xchange. To download the following samples, right-click to save the file. Please note: Installation of the E-TRAC Xchange Software Application is required to open these files.

E-TRAC Emulator

E-TRAC Em is a simulation tool developed by Minelab enthusiast Max Derouen and provides insight into the functionality of Minelabs E-TRAC metal detector. E-TRAC Em allows you to experiment with E-TRAC functionality, as well as, add targets and patterns to suit your requirements. Please note: E-TRAC Em is not a Minelab product and use of this software is governed by the terms of the end user license agreement, if any, which accompanies or is included with the software "License Agreement". Minelab provides this software to you as-is for your convenience. It is not endorsed, warranted or supported by Minelab. In no event shall Minelab be liable for any special, indirect or consequential damages as a result of downloading and/or use of this software.

E-TRAC Em - 16.70 MB

< Back to TREASURE detectors

Product added to cart
Continue Shopping
View shopping cart
Close X
Shipping Information
Close X
Buying Online
Website by Bridgehead ...Powered by WebTemplate