Treasure Talk

Treasure Talk

Explorer SE Pro

'Recovery Deep' in depth

October 22, 2010 02:23pm

The Recovery Deep setting on the E-TRAC, Explorer and Explorer SE detectors is designed to enhance the detection and identification of deep targets. This article will explain the way in which deep recovery mode enhances the operation of the detector and points out those situations when you may not choose to use this setting.

When Recovery Deep is turned on, it only has an effect on weak signals, stronger signals remain completely unaffected. When Recovery Deep is turned on and a weak signal is detected, the identification signals undergo stronger filtering to smooth out the data

Posted by Phil Beck on October 22, 2010 02:23pm | 0 Comments

Don't forget Factory Preset!

September 20, 2010 01:50pm

I have heard from some users that have tied themselves into knots when trying to find the best settings for their detector. This can happen because there are some combinations of settings that don’t work well together and there are some lesser used settings that you may have set and then forgotten to check.

In these cases please remember to perform a Factory Preset. This will return your detector to the settings that it contained from the factory.

Posted by Phil Beck on September 20, 2010 01:50pm | 7 Comments
Found 2 Results, displaying 1 to 2
Website by Bridgehead ...Powered by WebTemplate