Treasure Talk

Treasure Talk

GPX 5000

So you want to find a patch

May 01, 2014 10:00am

This blog is about highlighting some of the decisions I make when out patch hunting and why.

Posted by Jonathan Porter on May 01, 2014 10:00am | 0 Comments

Tracking, Motion, and Sweep Speed – Part 2

March 14, 2014 03:04pm

One of the hardest skills for a new detector operator to develop is a slow swing speed, now read how...

Posted by Nenad Lonic on March 14, 2014 03:04pm | 2 Comments

Tracking, Motion, and Sweep Speed – Part 1

February 14, 2014 10:27am

With the introduction of the Motion settings on the GPX series detectors, there has been a bit of confusion among some users as to what it actually does, and also how it differs from the Tracking speed selection. I’ll start with explaining Tracking speeds.

Posted by Nenad Lonic on February 14, 2014 10:27am | 2 Comments

The new Minelab PRO-SWING 45 harness

August 02, 2013 10:00am

If you own a GPX 4800, GPX 5000 or the new CTX 3030, you'll be interested in Minelab's new harness; the PRO-SWING 45.

All GPX models are supplied with a good quality harness, and the PRO-SWING 45 builds on this platform, taking it to a higher level.

The main inclusion with this harness is an integrated J-strut, designed to transfer the weight of the detector from your shoulder and neck, down to your hip...

Posted by Gordon Heritage on August 02, 2013 10:00am | 2 Comments

What I listen for when chasing gold at depth

May 30, 2013 11:35am

There are some basic rules that should be at the forefront of your mind when detecting for gold, probably the most important one being to dig everything. No one can accurately determine if a signal is gold just by listening to the signal response, especially if the target is large or close to the surface of the ground. There is another side to gold prospecting with a metal detector that requires a different approach, this is often dictated by expediency due to time restraints and in a lot of cases an attempt to maintain some sanity, these areas are often in and around old diggings where there is a lot of trash from both modern and Old Timers.

Posted by Jonathan Porter on May 30, 2013 11:35am | 6 Comments

Renewing my one ounce membership for 2013

April 12, 2013 02:20pm

Whenever I hear the term ‘’every man and his dog has been there” I am always up for the challenge as to see what they have left behind for me. On a recent trip to the Goldfields I decided to spend my time working some old diggings located in a gully that over the years has been well known to many prospectors. Including myself as a 12 year old where I found my very first nugget operating the XT 17000.

Every detector operator approaches an area in their own unique and individual way. Whether that be deciding to venture off in a certain direction because something in the distance catches your eye. Things like a certain type of tree or shrub, quartz and ironstone, rabbit warrens presenting the deeper ground mineralisation or even something as simple as a web containing a big spider in the centre of it. Resulting in the prospector detecting in another direction as to what they normally would. As long as you are out moving that coil around you are in with a chance of finding something that has been missed by others.

Posted by Angus James on April 12, 2013 02:20pm | 2 Comments

Those little ones add up

February 21, 2013 02:39pm

There’s been a real buzz around the world lately with the discovery of a monster gold nugget in Victoria’s Golden Triangle; it never ceases to amaze me the amount of large nugget finds that keep coming out from the richest, but also the most detected dirt on the planet!

Posted by Jonathan Porter on February 21, 2013 02:39pm | 3 Comments

Detecting in the Sixteen to One Mine - Part 2

January 22, 2013 09:20am

One might think that within not too long a period a person could run his metal detector over every inch of ground inside a mine. However because the Original Sixteen to One is a combination of a number of old mines and the property has been worked on a more or less continuous basis for well over 100 years, there are literally miles of old underground workings to explore and one could spend a lot of time going over every bit of the vein that was exposed in the walls of the old workings.

Posted by Chris Ralph on January 22, 2013 09:20am | 0 Comments

I should have used the PRO-FIND 25

January 02, 2013 11:08am

The day looked like it was going to be hot and the humidity levels even at this time of the morning were already on the rise, I was loading my truck getting ready for an early bird assault on an old surfacing area that has been productive for me over the years and wanted to make sure I hit the ground running with everything ready to go before things got too uncomfortable.

Posted by Jonathan Porter on January 02, 2013 11:08am | 5 Comments

Back to the Golden Triangle

December 19, 2012 03:20pm

The time had finally arrived! I was on the plane flying back to the Victorian Gold Fields all the way from far North Queensland, meeting up with my old man to spend some time hunting down that elusive yellow metal. I had spent a lot of time gold prospecting around the triangle with my father over the years with both of us uncovering many great finds, so I was very excited to be going back to my old stomping grounds. To add to the excitement I would be swinging a brand new GPX 5000 as I recently traded in my GP 3500. I was also very keen to try out the new Fine Gold Timings on the GPX 5000 after hearing so many great things about this new Timing.

Posted by Angus James on December 19, 2012 03:20pm | 1 Comment
Found 23 Results, displaying 1 to 10
< Previous 1 2 3 Next >
Website by Bridgehead ...Powered by WebTemplate