Equally adaptable for all target types and ground conditions.
True intelligent Simultaneous Multi-Frequency for maximum performance, plus a wide range of single frequencies.
Equally adaptable for all target types and ground conditions:
Fast recovery speed with accurate Target ID ensures you won’t miss any valuable targets among the trash.
Each Detect Mode features 2 custom Search Profiles so you can save your favourite settings in each mode.
Compatible with ultra-fast wireless audio with the WM 08, and fast aptX™ Low Latency / Bluetooth headphones.
Rugged and lightweight construction allows you to enjoy long detecting sessions in any environment.
EQUINOX is fully submersible, ideal for detecting at the beach and in rivers, streams and lakes. (3m / 10-feet).
The clear LCD features large Target ID numbers so you can see your target ID at a glance. All of the information you need when detecting is right there in front of you.
Detect Modes and operating frequency can be instantly changed at the push of a button for a dynamic and uninterrupted detecting experience.
The EQUINOX 600 & 800 offers a variety of coils for specialized detecting. The EQX 06 Smart Coil, EQX 11 Smart Coil, and EQX 15 Smart Coil by Minelab are available from Minelab Dealers worldwide. Third party accessory coils for the EQUINOX Series are available from Coiltek.
Multi-IQ Simultaneous Multi-Frequency
Low frequencies typically give more depth on large targets than high frequencies, which are usually more sensitive to small targets. With Multi-IQ you can operate across the full spectrum of frequencies simultaneously for maximum results.
3F×3​ (Three Frequency Times Three) provides three individual transmit frequencies in the one metal detector, selectable at the push of a button. Each transmit frequency optimises the detector for different size targets and conditions. EQUINOX 600 offers 3 single frequencies of 5, 10, and 15 kHz, giving a 3 times range or ratio from 5 to 15, hence the 3F×3 technology designation.
The individual selectable frequencies in EQUINOX 600 are:
5 kHz - Great for large silver coins
10 kHz - Good for small Roman hammered coins
15 kHz - A good general treasure detecting mode
Having three selectable frequencies gives the versatility that is equivalent to three conventional single frequency detectors.
Note that EQUINOX Series detectors also feature Multi-IQ technology which allows you to operate all available single frequencies plus more, simultaneously. The option to operate your detector in a single frequency can be helpful if you are experiencing excessive ground noise when using the Multi-Frequency setting.
Wi-Stream uses efficient low-power digital audio transmission to achieve no perceivable audio time lag (<10 ms) between the Wi-Stream enabled detector and the WM Wireless Module. With multiple channel capability, this wireless technology provides reliable communication with maximum sound quality.
Wi-Stream technology is offered in a range of Minelab detectors, however the WM modules are not cross compatible between detectors.
WM module and detector compatibility:
WM 12 - GPZ 7000
WM 10 - CTX 3030
WM 08 - EQUINOX Series
This Instruction Manual does not include information regarding the EQUINOX Software Update 2.0 or the EQUINOX Software Upgrade 3.0.
This Instruction Manual does not include information regarding the EQUINOX Software Update 2.0 or the EQUINOX Software Upgrade 3.0.
This Instruction Manual does not include information regarding the EQUINOX Software Update 2.0 or the EQUINOX Software Upgrade 3.0.
This Instruction Manual does not include information regarding the EQUINOX Software Update 2.0 or the EQUINOX Software Upgrade 3.0.
This Instruction Manual does not include information regarding the EQUINOX Software Update 2.0 or the EQUINOX Software Upgrade 3.0.
This Instruction Manual does not include information regarding the EQUINOX Software Update 2.0 or the EQUINOX Software Upgrade 3.0.
This Instruction Manual does not include information regarding the EQUINOX Software Update 2.0 or the EQUINOX Software Upgrade 3.0.
This Instruction Manual does not include information regarding the EQUINOX Software Update 2.0 or the EQUINOX Software Upgrade 3.0.
This Instruction Manual does not include information regarding the EQUINOX Software Update 2.0 or the EQUINOX Software Upgrade 3.0.
This Instruction Manual does not include information regarding the EQUINOX Software Update 2.0 or the EQUINOX Software Upgrade 3.0.
To update your EQUINOX 600 or EQUINOX 800 with the Minelab EQUINOX 2.0 Software Upgrade, please click here.
To update your EQUINOX 600 or EQUINOX 800 with the Minelab EQUINOX 3.0 Software Upgrade, please click here.