banner_xterra_series_955px_x_231px.jpg

X-TERRA Series

To further enhance the performance of your Minelab detector, an extensive range of accessories are available. These accessories are designed to add to your detectors versatility when you need to adapt to various detecting environments.

Genuine Minelab accessories ranging from cables to coils are designed to deliver optimum performance and as a result are supplied with a global Minelab warranty (terms and conditions apply).

A selection of Minelab accessory coils has also been designed to help you find more treasure across a range of environments and ground conditions. Whether you are looking for deep treasure or gold in flat open ground, or searching in constricted spaces, there is an accessory coil that will optimise your detectors performance.

Coils
Find more with X-TERRA accessory coils available in a range of frequencies to suit your needs
Skidplates
Replacement skidplates to keep your coils in top shape
Bags & Covers
Protective covers, and carry bags for convenient detector storage and transportation

Coils

X-TERRA detectors are capable of operating at one of three different frequencies; 3 kHz, 7.5 kHz or 18.75 kHz. The operating frequency is determined by the coil being used and affects the detector’s performance. Generally, the lower the frequency, the deeper the detector can penetrate the ground.

At low frequencies sensitivity to small low conductive targets is reduced. The higher the frequency, the higher the sensitivity to small targets, however detection depth is reduced. Operate the detector at 18.75 kHz (high frequency) to find small nuggets and fine jewellery. Operate the detector at 3 kHz or 7.5 kHz (lower frequencies) when searching for coins and relics.

Ensure that the coil you select is compatible with your detector:

  Coil Frequency
X-TERRA Model 3 kHz 7.5 kHz 18.75 kHz
X-TERRA 30    
X-TERRA 50  
X-TERRA 70
X-TERRA 305  
X-TERRA 505
X-TERRA 705
X-TERRA 705 Gold Pack
X-TERRA 705 Dual Pack

To read more about X-TERRA coil compatibility, view the Coil Selection Guide.

X-TERRA 6-inch Concentric Coil - 7.5 kHz

This medium frequency (7.5 kHz) lightweight waterproof Concentric coil has good depth for coin and treasure sized targets and excellent target separation in areas littered with junk.

Compatible with X-TERRA: 705, 705 Gold Pack, 505, 305, 70, 50, 30

Part No. 3011-0104


X-TERRA 6-inch Double-D Coil - 18.75 kHz

This high frequency (18.75 kHz) lightweight waterproof Double-D coil is extremely sensitive to sub-gram gold nuggets, specimens and gold jewellery and has excellent target separation in areas littered with junk.

Compatible with X-TERRA: 705, 705 Gold Pack, 505, 305, 70, 50

Part No. 3011-0105


X-TERRA 9-inch Concentric Coil - 3.0 kHz

This low frequency (3.0 kHz) lightweight waterproof Concentric coil is ideal for highly conductive targets such as silver and copper coins, large rings and relics.

Submersible to 1 meter.

Compatible with X-TERRA: 705, 705 Gold Pack, 505, 70

Part No. 3011-0099


Coiltek 6-inch X-TERRA Digger

Fully submersible, the 6” X-TERRA utilises the Minelab VFLEX technology and is the perfect choice for trashy areas, giving excellent target separation and stability. Easy to swing and manoeuvre through tight areas, it also performs well in different soil conditions. Operating at 3 KHz, the Diggers allows the user to hear targets of certain metals more clearly than the 7.5 KHz and 18.75 KHz frequencies- which means better opportunities for more rewarding targets.

Compatible with X-TERRA: 705, 505, 70

Part No. C04-0013

For more information visit the Coiltek website here.


 

X-TERRA 9-inch Concentric Coil - 7.5 kHz

This medium frequency (7.5 kHz) lightweight waterproof concentric coil is the standard X-TERRA metal detector coil for good reason - good depth, great target separation and accurate pinpointing - the perfect general purpose coin hunting coil.

Compatible with X-TERRA: 705, 705 Gold Pack, 505, 305, 70, 50, 30

Part No. 3011-0098


X-TERRA 9-inch Concentric Coil - 18.75 kHz

This high frequency (18.75 kHz) lightweight waterproof Concentric coil has similar properties as the 7.5 kHz version, but is more sensitive to smaller, low conductive targets such as when detecting for jewellery on ocean beaches.

Compatible with X-TERRA: 705, 705 Gold Pack, 505, 305, 70, 50

Part No. 3011-0100


X-TERRA 10.5-inch Double-D - 7.5 kHz

This medium frequency (7.5 kHz) lightweight water resistant Double-D coil has excellent ground coverage and good depth on most targets. Being a Double-D makes it ideal in areas high in ground mineralisation.

Compatible with X-TERRA: 705, 705 Gold Pack, 505, 305, 70, 50. 30

Part No. 3011-0102


X-TERRA 10.5-inch Double-D - 18.75 kHz

This high frequency (18.75 kHz) lightweight water resistant Double-D coil is more sensitive to small gold nuggets and fine jewellery and has excellent ground coverage. Being a Double-D makes it ideal in areas high in ground mineralisation.

Compatible with X-TERRA: 705, 705 Gold Pack, 505, 305, 70, 50

Part No. 3011-0103


X-TERRA 10 x 5-inch Double-D Coil - 18.75 kHz

The standard X-TERRA 705 Gold Pack coil is high frequency (18.75 kHz) lightweight water resistant Double-D coil. It is very sensitive to small gold nuggets and fine jewellery and has excellent ground coverage. Being a Double-D makes it ideal in areas high in ground mineralisation.

Compatible with X-TERRA: 705, 705 Gold Pack, 505, 305, 70, 50

Part No. 3011-0101


X-TERRA 15-inch Double-D Coil - 3.0 kHz

This low frequency (3.0 kHz) waterproof Double-D coil has  exceptional ground coverage and depth.

Compatible with X-TERRA: 705, 705 Gold Pack, 505, 70

Part No. 3011-0313


X-TERRA Coil Range Brochure 2015 EN - 678.77 KB

X-TERRA 15-inch Double-D Coil - 7.5 kHz

This medium frequency (7.5 kHz) waterproof Double-D coil has Improved depth and ground coverage across a wide range of target sizes.

Compatible with X-TERRA: 705, 705 Gold Pack, 505, 70

Part No. 3011-0314


X-TERRA 15-inch Double-D Coil - 18.75 kHz

This high frequency (18.75 kHz) waterproof Double-D coil provides great ground coverage while being very sensitive to small targets. This coil is a great choice for gold prospecting

Compatible with X-TERRA: 705, 705 Gold Pack, 505, 305, 70, 50

Part No. 3011-0315


Skidplates

Keep your coils in top condition for a long and reliable life. We recommend replacing your skidplates before they wear through, so regularly check the condition of your detecting gear.

6-inch Skidplate, Black

 
Fits 6-inch Double-D and Concentric X-TERRA Series coils.

Part No. 3011-0223


9-inch Concentric Skidplate

Fits 9-inch concentric X-TERRA Series coils.

Part No. 3011-0153


10.5-inch Double-D Skidplate, Black

Fits X-TERRA and FBS 10.5-inch Double-D coils.

Part No. 3011-0152


10 x 5-inch Elliptical Skidplate, Black

Fits X-TERRA 10 x 5-inch Double-D Coil.

Part No. 3011-0232


Shafts & Shaft Hardware

Coil Wear Kit

Part No. 3011-0150


Armrest Kit, X-TERRA Series

Fits all X-TERRA Series detectors.

Part No. 3011-0149


Upper Shaft, Black (X-TERRA 705)

Fits X-TERRA 705, X-TERRA 705 Dual Pack, and X-TERRA 705 Gold Pack

Part No. 3011-0198


Middle Shaft, Black (X-TERRA 705)

Fits X-TERRA 705, X-TERRA 705 Dual Pack, and X-TERRA 705 Gold Pack

Part No. 3011-0179


Upper Shaft, Red (X-TERRA 305 & 505)

Fits X-TERRA 505 and X-TERRA 305

Part No. 3011-0197


Middle Shaft, Red (X-TERRA 305 & 505)

Fits X-TERRA 305 and X-TERRA 505

Part No. 3011-0178


Lower Shaft, X-TERRA Series

Fits all X-TERRA Series detectors

Part No. 3011-0177


Short Lower Shaft, X-TERRA Series

Fits all X-TERRA Series Detectors. Short version to reduce the maximum detector length.

Part No. 3011-0173


Audio Accessories

Koss Headphones

Part No. 3011-0214


RPG Headphones

Part No. 3011-0181


Bags & Covers

X-TERRA Series Environmental Rain Cover

Fits all X-TERRA Series Detectors.

This custom cover is an excellent way to protect your detector from dirt, sand, salt spray, light rain, etc.

Part No. 3011-0165


Detector Carry Bag

Fits all Minelab Detectors

Part No. 3011-0277